This post may contain affiliate links. Read our disclosure here.
To stop a power steering leak, there may be some additives to help before making a costly repair. It’s important to spot these leaks before they become too bad, or even drain all of the fluid out of your power steering system causing major mechanical damage. On top of mechanical damage to your system, steering your vehicle could be affected which is extremely dangerous if this occurs while driving.
In this article we focus on a variety of different additives that can not only help stop a power steering leak, but also act as a preventative substance. This prevention not only includes keeping the seals and gaskets in the system conditioned but also making sure the internal components of pumps and racks are well lubricated and have extra protection against years of abuse.
Important Considerations of a Leaking System
It’s important to take care of leaks of any kind within your vehicles systems containing fluids. If not taken care of, additional damage could occur and you’ll find yourself doing more than just trying to stop a power steering leak. If your steering system leaks and you are unaware, the internal components of pumps and steering racks could potentially see damage from the lack of lubrication. On top of mechanical damage, it can be difficult to steer your vehicle which is dangerous while driving.
Keeping fluid in your vehicles power steering system will help keep the cost of maintenance repairs down and ensure the components will be well lubricated and protected from premature wear.
If there is too much mechanical damage to your vehicles power steering system, there’s a possibility it may be too far gone and an additive may not be able to fix it. It’s important to monitor the system to identify if this may be the case as it may need inspected by a mechanic. We recommend using an additive before leaks occur to keep the system in good condition as it ages which will reduce the need to stop a power steering leak in the future.
Product Guide to Stop a Power Steering Leak
We’ve gone through and compiled a list of some of the most popular additives on the market to help stop a power steering leak. We’ve added some important information and key points about each to help you make the right decision on which additive is best for you and your vehicles power steering system. Read on to learn more!
Lucas 10008 Power Steering Stop Leak
Lucas is one of the leading manufacturers when it comes to additives and vehicle fluids. With so much experience in the industry, it’s easy to trust their product will not disappoint. They have additives to help with just about any kind of fluid in your vehicle. It’s not surprising they also have an additive to help stop a power steering leak.
Their power steering stop leak is an excellent and trusted product. In fact, they are so confident in their product they even have a money back guarantee printed right on the bottle! Check out the list of features below to see if this may be the product you’re looking for to stop a power steering leak in your vehicle.
- Helps stop leaks in power steering systems
- Helps reduce squeals, hard spots in steering, and sloppiness in steering systems
- No harmful solvents makes it environmentally friendly
- Corrects slack in steering racks
Dosage Guide for Lucas Power Steering Stop Leak
Lucas Power Steering Stop Leak comes in a single bottle size of 12 ounces.
- 12 ounces (one bottle) treats an entire power steering system
Lucas Power Steering Stop Leaks starts working immediately. The typical application only requires one bottle. Simply add it to your system when the fluid is low and wait to see the results! Check out the video below for some more info on how Power Steering Stop Leak can stop a power steering leak for you.
Bar’s Leaks Power Steering Stop Leak
Bar’s Leaks is another well known brand that specializes in building additives specifically for stopping leaks. They are in the market for all kinds of equipment from cars, commercial trucks, lawn equipment and even marine applications. Being so involved with a wide variety of equipment, they understand how important it is for the end users. This especially means understanding how critical it can be to stop a power steering leak.
Your vehicle needs to stay reliable and be able to get you from point A to point B without any issues. One of their popular products, Power Steering Stop Leak, is designed to stop a power steering leak and help ensure the system holds fluid and won’t leave you stranded. Below are a few stand out attributes of Power Steering Stop Leak.
Dosage Guide for Bar’s Leaks Power Steering Stop Leak
Bar’s Leaks Power Steering Stop Leak only comes in one size, this is and 11 ounce bottle.
- 11 ounces (one bottle) treats 3 ounces of fluid
When addling Power Steering Stop Leak to your system, it’s important to note that 1 bottle treats up to 3 quarts of fluid in a system. This should be plenty in a standard vehicles power steering system, but if you have a larger vehicle or a system that has more than 3 quarts of fluid, it may be necessary to add more than 1 bottle. As with any additive, keep an eye on the system to check for a reduction in leaks. If the leaks continues, add an additional bottle after a month of use.
Remember, additives may be good to stop a power steering leak but if there is already extensive mechanical damage to the system it may be too late. That’s why we recommend using an additive before it’s too late!
No Leak Power Steering Stop Leak
No Leak Power Steering Stop Leak is another excellent product produced by Gold Eagle to stop a power steering leak. Gold Eagle specializes in products aimed at vehicles and equipment in all areas of use. From cars and trucks, to marine and power equipment. If there’s some kind of fluid that can be treated, Gold Eagle has built an additive to help improve it. Power Steering Stop Leak is formulated to treat and condition various seals and o-rings within your vehicles power steering system to restore their ability to hold fluid in the system.
On top of sealing abilities, Power Steering Stop Leak is also built to help quiet components within power steering systems by coating and lubricating internally. Below is a quick list of features of No Leak Power Steering Stop Leak.
- Stops leaks in power steering systems by conditioning O-rings
- Works to revitalize seals that have been dried and hardened
- Quiets pumps and gears within the system
- Compatible with all power steering fluids
Dosage Guide for No Leak Power Steering Stop Leak
No Leak Power Steering Stop Leak comes in a single bottle size of 16 ounces.
- 16 ounces will treat all fluid in a power steering system
Once added to stop a power steering leak, your vehicle should be used for at least 300 miles to see the full effect of No Leak Power Steering Stop Leak. After proper usage, the seals in your system will have had time to be softened and brought back to life. You should notice a difference fairly quickly, but it will take a short time for Power Steering Stop Leak to fully condition seals within the system and stop any leaks that may have formed due to old seals. Check out the video below for additional information!
Blue Devil Power Steering Stop Leak
If you’re looking for a product to stop just about any kind of leak, you’ve probably heard of Blue Devil. Blue Devil has been in the business of stopping leaks since 1997 and has had plenty of experience doing so over the years. As with a lot of problem areas, they’ve designed a product to help stop a power steering leak as well in their Blue Devil Power Steering Stop Leak. With one main goal in mind, this product is easy to sum up:
- Works to stop leaks in all power steering systems
- Restores dried, cracked, and shrunken seals
- Stops leaks in worn rack and pinion systems
- Money back guarantee to work to stop leaks
Dosage Guide for Blue Devil Power Steering Stop Leak
The standard size Power Steering Stop Leak is sold in is 8 ounces.
- 8 ounces treats an entire power steering system
Adding Blue Devil Power Steering Stop Leak to your system to stop a power steering leak is simple. Locate your vehicles power steering reservoir and add 1/3 of a bottle to the system. The vehicle will then have to be ran and or driven anywhere between 1 hour and 2 days depending on how large the power steering leak is. Monitor the leaking area and if leaking continues, add additional Power Steering Stop Leak to the system. Check out the video below from Blue Devil for additional information to see how they can help stop a power steering leak!
Bar’s Leaks Power Steering Repair
We reviewed one of Bar’s Leaks products above. As we mentioned, Bark’s Leaks has a handful of different products out in almost every category of equipment and transportation that contains fluids! Not only do they have a stop leak to help stop a power steering leak that we reviewed above, they also have a second additive to repair a power steering system as well!
The difference between the two is simple, their Power Steering Stop Leak is simply used to stop a power steering leak. If that’s all you’re looking for, that may be the best choice for you. However, their Power Steering Repair will not only stop a power steering leak, it will go the extra distance to help recondition and protect additional parts of your vehicles power steering system as well. We’ve compiled a list of attributes their Power Steering Repair additive has below.
Dosage Guide for Bar’s Leaks 1600 Power Steering Repair
Bar’s Leaks Power Steering Repair comes in a 16 ounce bottle.
- One bottle (16 ounces) treats 2 to 3 quarts of fluid
When using Power Steering Repair, be sure to add equal amounts from each of the two chambers to restore the fluid level in your vehicles power steering system. For maximum performance, an entire bottle should be used in the system. One full bottle will treat 2 to 3 quarts of fluid so be sure to check the capacity of your power steering system when treating. Power Steering Repair will begin working immediately and results will be seen within 2 day or 100 miles of driving.
ATP AT-205 Re-Seal
ATP Automotive has designed a product that helps with restoring seals, gaskets, and reducing leaks in many applications. Not only can AT-205 RE-SEAL help stop a power steering leak, it can be used in other applications from transmissions, to hydraulic systems, to engine oil. This makes this product extremely versatile which is a must have around the garage. If you don’t use it all the first time, there is sure to be some additional uses for it down the road. Below are a few notable features of AT-205 RE-SEAL:
- Helps restore worn or dried out seals
- Will not harm bearings or other components
- Can be used in power steering, transmissions, engines, differentials, and hydraulic systems
- Formulated to keep from over-swelling or breaking down seals
Dosage Guide For ATP AT-205 RE-SEAL
The standard size of ATP AT-205 RE-SEAL is an 8oz bottle.
- One 8oz bottle will treat 6 quarts of fluid
Your power steering system should have more than 6 quarts of fluid so one bottle should be enough to get the maximum effect out of AT-205 RE-SEAL. As with all additives, it’s important not to overfill your vehicles power steering system with fluid. Take note of the fill level recommended in your power steering fluid reservoir. You should know the quantity in order to add the proper amount, but once you bein adding, just monitor the level during the process. Note that some existing fluid may need to be removed if the system is currently topped off.
Liqui Moly Power Steering Fluid Stop Leak
Liqui Moly Power Steering Fluid Stop Leak is another great product that will help stop a power steering leak. Liqui Moly was founded in 1957 and uses the best German engineering when developing their additives. This holds true for their Power Steering Additive as no corners were cut.
- Stops leaks by regenerating hardened seals
- Reduces noise levels of power steering components
- Cleans holes and ducts in steering components
- Safe to use with ATF II, ATF III and central hydraulic system oils
Dosage Guide For Liqui Moly Power Steering Fluid Stop Leak
The standard size container of Power Steering Fluid Stop Leak is 35 mL (1.2 ounces)
- 35mL (1.2 oz) of additive will treat 1 liter (1 quart) of fluid
When adding Power Steering Fluid Stop Leak to your vehicles power steering system, one container is enough to treat 1 quart of fluid. If you’re not sure how much fluid your power steering system takes, be sure to consult your vehicles user manual. If the power steering system contains more than a quart of fluid, you may need to buy more for the maximum performance. Simply add the stop leak to the power steering reservoir and it will naturally circulate into the system when the vehicle is driven and will start working to stop a power steering leak in the system immediately!
As with other additives, it will take driving and using your vehicle for a few miles before the effects will be seen.
STP Power Steering Fluid + Stop Leak
If you’re looking for something universal for your vehicle, STP makes a power steering fluid that also contains a stop leak that will stop a power steering leak. No need to buy fluid and an additive when you can buy this 2 in 1 product. They have made your life even easier! As with standard additives, STP 2 in 1 power steering fluid works to revitalize dried, hardened, and shrunken seals in power steering systems to stop leaks. It also protects the internals of power steering pumps from wear and slows them from breaking down. We’ve made a short list of the attributes below.
- 2 in 1 formula contains power steering fluid and stop leak
- Revitalizes dried, hardened, and shrunken seals
- Lubricates system to protect internal components against wear
Dosage Guide For STP Power Steering Fluid + Stop Leak
The standard size container of STP Power Steering Fluid + Stop Leak is 12 ounces.
- Recommended use of 7 ounces per quart of required fluid in a power steering system
Power Steering Fluid + Stop Leak can be used instead of standard power steering fluid as a preventative maintenance mechanism, or added to a leaking system. When adding this power steering fluid to stop a power steering leak, it is recommended to use at least 7 ounces of Power Steering Fluid + Stop Leak per quart of fluid required in your power steering system. This is the minimum recommended for maximum effectiveness and using only this fluid in the entire system will give the best results.
Final Thoughts
At the end of the day, there are many different additives on the market to help stop a power steering leak. Each product is slightly different with their size, features, and abilities to repair the items you’re focused on. We’re hoping this guide has helped bring some light to some of the more popular products and helped with making your decision on the right one for you!
Brian is one of the best when it comes to tinkering and engines of all shapes and sizes. Growing up as the son of a mechanic, he started turning wrenches before he could even walk. Naturally, he’s one of our favorites to consult when it comes to keeping our equipment in tip top shape.